6 Aquifer Pumps for Irrigation and Drainage
The selection of pumps plays an important role in ensuring you meet all the requirements of drainage and irrigation needs.
The right aquifer pumps for drainage and irrigation ascertains that the water requirement is met and provides better efficiency.
Some of the best aquifer pumps for drainage and irrigation from pump suppliers, like Pumpbiz, include the following:
1. A Deep-Well Turbine Pump
This kind of pump is specifically designed for users to use in a cased well or where water surfaces are below the practical limits of centrifugal pumps. You can also use it with a surface water system.
Since the intake for turbine pumps is underwater, priming won’t be an issue. Turbine pumps’ efficiencies are greater than or comparable to many centrifugal pumps. But they are more costly than a centrifugal pump and, perhaps, much more difficult to repair and inspect.
2. Briggs Diesel Engine Pump for Irrigation
This is a powerful, quiet, and economical pump. It has proven dependable and often features several options for labor-saving.
The pump set is also based on JCB’s British and modern-built Ecomax range that fully complies with new emission regulations.
A five-engine size is also available, ranging from 75 to 173 hp. This drives centrifugal pumps with throttle controllers and Brigg’s pump protection systems.
3. Borehole Water Pump
The kind of pump solely depends on the water depth, the pressure required, and the flow rate. Disparities in all these variables can affect the size and model you need.
One perfect option that meets all these variables is a borehole water pump. You can it use to supply drinking water or for irrigation. That makes it more suitable for commercial and domestic applications.
4. Positive Displacement Pumps
A positive displacement is mostly used to pump fluids with high viscosity. This may include foodstuffs, resins, paints, or oil.
It is also mostly preferred in applications where high-pressure output or dosing is needed. Unlike a centrifugal pump, the positive displacement pump’s output doesn’t get affected by pressure.
5. Volute Pumps
This type of volute pump is the most common in the category. It comes with an impeller, usually housed in a wide spiral casing.
Water normally enters the impeller’s eye, and then it is thrown outwards. This kind of pump also doesn’t come with a diffuser vane to reduce water velocity.
Rather, the shape of the volute itself is what reduces the velocity. This design as well develops an unequal distribution of pressure, leading to heavy thrust loads on your impeller.
6. Submersible Pump
This is a turbine pump, which is enclosed in a submersible motor. Usually, this motor is electric. Both motor and pump get suspended in water, thus, eliminating bearing retainers and long drive shaft needed in deep-well turbine pumps.
Since this pump is on top of the motor, water normally enters the system. This happens through the screen, which is between the motor and the pump.
Irrigation and drainage pumps are important investments and one which businesses and homeowners are gaining more interest in preserving. So offering your pump service will make more sense, especially during winter.